overkill04
Mechanical
- May 9, 2005
- 93
Hi All,
I've never had to select a printer for an machine shop before and it seems a bit daunting.
I'm working for a shop that is going to be adding a Mechanical Designer to it's staff. It will only need to be a low volume printer as there will only be one designer using it and the shop is working on one project at a time.
Most of the drawings will be A or B size, but the odd one will be a D size.
Where do I begin?
Specs, Intel Pentium M 2.16 Mhz
SW 2007 R2.2
1.5 Gb Ram
NVidia GE Force GO 6800 256Mb
I've never had to select a printer for an machine shop before and it seems a bit daunting.
I'm working for a shop that is going to be adding a Mechanical Designer to it's staff. It will only need to be a low volume printer as there will only be one designer using it and the shop is working on one project at a time.
Most of the drawings will be A or B size, but the odd one will be a D size.
Where do I begin?
Specs, Intel Pentium M 2.16 Mhz
SW 2007 R2.2
1.5 Gb Ram
NVidia GE Force GO 6800 256Mb