We have started using it, in the SW US, but are having problems with longitudinal cracking along the wheel path. I'm thinking that maybe the lower temperature limit is not low enough, or the deviation from average low is not compensated for adequately. In any case it appears that the oil is too brittle. Anybody else using this?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
LTPP Bind 3.1
- Thread starter LCruiser
- Start date