ltscale

[Welshman]

Is is possible to have one drawing that has two xrefs in model spaces and display them in paper space in two seperate vports with each vport having a different LTSCALE.

For instance Vport one is showing a 1:500 OS map with a LTSCALE of 500 and vport two is showing a 1:20 detail with an LTSCALE of 20.

This is so that hidden and dashed lines appear as required in both vports.

Regards

Welshman

 

[Friptzap]

Yes this is controlled with the psltscale command set this to 1 and changing the ltscale to 1. Your viewports ltscales will then be set to the scale of the viewport.

 

[Welshman]

Thanks Friptzap

Its seems to work a treat.

regards

Welshman