Jul 28, 2011 #1 richards49323 Mechanical Jul 28, 2011 5 What would the push out force standard for M4 weld nut welded to 1.5mm thick nickel-zinc pre-plated steel?
What would the push out force standard for M4 weld nut welded to 1.5mm thick nickel-zinc pre-plated steel?
Jul 28, 2011 1 #2 TVP Materials Apr 12, 2002 4,592 If this is a squre weld nut (4 projections), then a minimum value should be ~ 3000 N. Upvote 0 Downvote
Jul 29, 2011 Thread starter #3 richards49323 Mechanical Jul 28, 2011 5 What would it be if the 4m weld nut has 3 projections? Upvote 0 Downvote
Jul 29, 2011 #4 TVP Materials Apr 12, 2002 4,592 3000 N is probably the lowest force you should achieve for hat size. Some automakers require 4000 N minimum for M4/M6 size range. Upvote 0 Downvote
3000 N is probably the lowest force you should achieve for hat size. Some automakers require 4000 N minimum for M4/M6 size range.
Nov 28, 2011 Thread starter #5 richards49323 Mechanical Jul 28, 2011 5 Greetings, it’s been quite a while since I needed DiamlerChrysler weld standards. Now, I can’t even locate where to retrieve them. Any clues? Thanks again, richards49323 Upvote 0 Downvote
Greetings, it’s been quite a while since I needed DiamlerChrysler weld standards. Now, I can’t even locate where to retrieve them. Any clues? Thanks again, richards49323
Nov 28, 2011 #6 dbooker630 Materials Apr 16, 2004 525 Try this website: https://essd.extra.chrysler.com/ESSD/Login.jsp Upvote 0 Downvote
Nov 28, 2011 #7 TVP Materials Apr 12, 2002 4,592 The link from dbooker is for Chrysler standards. Daimler maintains there standards separately now that the two companies have split. In order to obtain Chrysler standards, you must register with Covisint and have Chrysler approve your application. Upvote 0 Downvote
The link from dbooker is for Chrysler standards. Daimler maintains there standards separately now that the two companies have split. In order to obtain Chrysler standards, you must register with Covisint and have Chrysler approve your application.
