Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Macro cameras 1

Status
Not open for further replies.

hkmensing

Mechanical
Jan 12, 2004
19
0
0
MY
Dear All, [peace]

[bugeyed]I'm looking for a small, cheap (around US$100.- - US$150.-), digital macro camera for our QC's to take pictures of defects of products in factories. They visit a lot of factories, so the camera should be small. And most defects are a small size so the camera must take very good macro pictures.
I know I'm asking for a lot here, but I have to try.

cheers, [cheers]

GM [morning]
 
Replies continue below

Recommended for you

Rich2001>
Thanks for the link to proscope. Very interesting, but I cannot use it for what I'm looking for. The proscope needs a laptop and that would mean I would have to by 20 laptops as well.

Cheers,

GM
 
Status
Not open for further replies.
Back
Top