Macro for Resolving all components in.... 3

[SBaugh]

Does anyone have Macro for Resolving all components in all areas of the assembly, including Sub-assemblies, parts and the imported bodies of the parts?

I have an STP file that got opened in the Suppressed state. Now I have to manaully go in an reslove each component down to the Body. I'm hoping someone might have written a macro for resolving all components including the bodies.

Any help is appreciated... Thanks!

Scott Baugh, CSWP

http://www.3dvisiontech.com

http://www.scottjbaugh.com

faq731-376

 

[TheTick]

For you... I'll try. It may be a day or two, though.

Regards,
Tick

 

[SBaugh]

Thanks Tick!

You are the man -

Regards,

Scott Baugh, CSWP

http://www.3dvisiontech.com

http://www.scottjbaugh.com

faq731-376

 

[TheTick]

<

http://www.esoxrepublic.com/models>

ScottUnsuppressAsmMacro.zip

Here it is. 90% of it pasted from SW help. Actually written in SW2001, but should be upward compatible.

Due to illness, the part of The Tick will be played by... The Tick.

http://www.EsoxRepublic.com

 

[CorBlimeyLimey]

Scott, doesn't the Edit > Unsuppress with dependants > ?? Configuration do what you want?

from (the City of) Barrie, Ontario.

Everyone has a photographic memory. Some just don't have film.

 

[SBaugh]

Thanks guys! Both ideas worked extremely well.

I personally like the Macro, because it's all in one button or in a Hotkey setup.

Thanks for pointing out the Edit > Unsuppress with dependants > ?? Configuration. Didn't think about that?

You both get a star!

Thanks again!

Scott Baugh, CSWP

http://www.3dvisiontech.com

http://www.scottjbaugh.com

faq731-376