Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Making 2D views render the same as the 3D model (Shaded with edges on) 1
- Thread starter rdpostak
- Start date
-
1
- Thread starter
- #2
To All,
Never mind, I figured it out on my own using the help function in Catia. For those of you that have asked or wanted to know, go to view properties and under the "View Generation Mode" go to Raster and then click on the options button to change how you want the view to look...Shaded with no edges, Shaded with edges...etc.
Richard D. Postak
Plastics Project Engineer
Toyota Motor Manufacturing Company - TMMK
Never mind, I figured it out on my own using the help function in Catia. For those of you that have asked or wanted to know, go to view properties and under the "View Generation Mode" go to Raster and then click on the options button to change how you want the view to look...Shaded with no edges, Shaded with edges...etc.
Richard D. Postak
Plastics Project Engineer
Toyota Motor Manufacturing Company - TMMK
- Status
Similar threads
- Locked
- Helpful tip
- Locked
- Question