christenhusz
Industrial
For one of our systems we use a DIN flange ND10 x NW20. We need to attatch the flange to a plate. Is it allowed to tap a small size (m5 or m6) schrew thread into the flat piece of the flange?
Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Making schrew thread in a flange
- Thread starter christenhusz
- Start date
- Status
Similar threads
- Locked
- Question
- Question
- Locked
- Question
- Locked
- Question