Jan 7, 2021 #1 Bartonrj25 Mechanical Oct 24, 2008 12 Is it bad practice to add a section view from a detail view or does it matter as long as your design intent is captured?
Is it bad practice to add a section view from a detail view or does it matter as long as your design intent is captured?
Jan 7, 2021 #2 MJCronin Mechanical Apr 9, 2001 5,097 Bart ... This is typically a matter of company policy.... but can sometimes be set by the CAD software in use Wisely, DASSAULT's "SOLIDWORKS" establishes definitions and makes policy (de facto) by the way that their software works https://help.solidworks.com/2018/en...rks/c_broken_out_section_view_detail_view.htm https://help.solidworks.com/2017/en...e a detail view,view, or another detail view. Some software packages (SIEMENS) specifically discuss section views taken from Detail views (see page 3-32) https://support.industrysoftware.au...raining/se/en/ST4/pdf/spse01545-s-1040_en.pdf MORE INFORMATION !!!! ..........Give us a detailed example of your probem.... tell us more about your specific issues !!! MJCronin Sr. Process Engineer Upvote 0 Downvote
Bart ... This is typically a matter of company policy.... but can sometimes be set by the CAD software in use Wisely, DASSAULT's "SOLIDWORKS" establishes definitions and makes policy (de facto) by the way that their software works https://help.solidworks.com/2018/en...rks/c_broken_out_section_view_detail_view.htm https://help.solidworks.com/2017/en...e a detail view,view, or another detail view. Some software packages (SIEMENS) specifically discuss section views taken from Detail views (see page 3-32) https://support.industrysoftware.au...raining/se/en/ST4/pdf/spse01545-s-1040_en.pdf MORE INFORMATION !!!! ..........Give us a detailed example of your probem.... tell us more about your specific issues !!! MJCronin Sr. Process Engineer
Jan 7, 2021 #3 SnTMan Mechanical Jan 22, 2005 6,818 Bartonrj25 said: Is it bad practice to add a section view from a detail view or... Click to expand... It is bad practice to add any view that is not needed to fully undertsand the subject of the drawing. Regards, Mike The problem with sloppy work is that the supply FAR EXCEEDS the demand Upvote 0 Downvote
Bartonrj25 said: Is it bad practice to add a section view from a detail view or... Click to expand... It is bad practice to add any view that is not needed to fully undertsand the subject of the drawing. Regards, Mike The problem with sloppy work is that the supply FAR EXCEEDS the demand
