Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Congratulations GregLocock on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Managing Raster Images in DWGeditor

Thread starter CanCad1
Start date Dec 16, 2009

Status: Not open for further replies.

Dec 16, 2009

CanCad1

Mechanical

Most editing tasks on legacy drawings using DWGeditor works okay until I came accross replacing a raster image on a label drawing. The image comes in okay but disappears when printed or saved to a PDF. I turn on the "Image Frame" of the and the frame will print without the actual image. I've also tried different raster formats (i.e. jpg, tiff, bmp, etc.) with no success during printing. Although, other raster images from previous inserted appear and prints ok.
I appreciate anyone's feedback on this. Thanks!