Material Advice

[TP2010]

I am looking for a stainlees steel that is 8mm hex with minimum hardness 34HRC or 321 brinell suitable for machining in sliding head machines. The parts have to pass a 75nm torque test. Any ideas?

 

[vanmorrison]

Hi, you might want to try another forum if you are still looking for information. This one is not very active or may not be the right one for your question.

I suggest that you try Mechanical Engineering other topics, Metal and Metallurgy Engineering, or Material Engineering other topics forums.

Double posting is frowned upon. Please see FAQ 731-376 for the rules.

Good Luck