Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations GregLocock on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Material calibration by DMA data

Status
Not open for further replies.
sportivo_cae

sportivo_cae

Mechanical
Oct 8, 2017
24
Hi,

i have the result of DMA data T(°C), frequency, G', strain and tan delta. How i can calibrate the material?
Where i can read about it?

thanks
 
Status
Not open for further replies.

Similar threads

liq001
  • Question
Material calibration
Replies
8
Views
1K
FEA way
FEA way
ShiningEngineer
  • Question
Understanding of Material Calibration Question
Replies
4
Views
886
ShiningEngineer
ShiningEngineer
WaldemarHH
  • Locked
  • Question
Material Data from Python Lists - Scripting
Replies
0
Views
123
WaldemarHH
WaldemarHH
abc123ali
  • Question
Different results in cohesive zone modeling for the same data input
Replies
8
Views
3K
FEA way
FEA way
M
  • Question
Material model for plain weave in ABAQUS
Replies
4
Views
1K
Materials Freak
M

Part and Inventory Search

Sponsor

Back
Top Bottom