Jun 16, 2014 #1 Novak11 Petroleum Jun 16, 2014 6 Do you think it is OK to use Carbon steel with just 3 mm CA for Heat Exchanger for naphtha with content of 100 ppmw of H2S? Thanks
Do you think it is OK to use Carbon steel with just 3 mm CA for Heat Exchanger for naphtha with content of 100 ppmw of H2S? Thanks
Jun 16, 2014 #3 metengr Materials Oct 2, 2003 15,478 Once you figure out the service temperature, use the reference material below to establish a corrosion rate http://books.google.com/books?id=kC...e&q=does naphtha corrode carbon steel&f=false Upvote 0 Downvote
Once you figure out the service temperature, use the reference material below to establish a corrosion rate http://books.google.com/books?id=kC...e&q=does naphtha corrode carbon steel&f=false
Jun 16, 2014 Thread starter #4 Novak11 Petroleum Jun 16, 2014 6 It is naphtha stabilizer and temp. is 165 degC. In the meantime I checked couple of similar applications and found that all materials are really CS+3mm CA. Upvote 0 Downvote
It is naphtha stabilizer and temp. is 165 degC. In the meantime I checked couple of similar applications and found that all materials are really CS+3mm CA.
