Shibuz
Chemical
- Apr 12, 2001
- 13
Hello,
Our company is looking into an Alaska Project.
We are involved in the development of a High Pressure Pumping System capable of operating in temperatures from - 50 Degrees F to + 140 Degrees F.
We have to come up with the skid for an outside unit. The material selected should be suitable for operation at the North Slope of Alaska, a severe-weather environment, winds to 100 mph, blowing snow, icing conditions etc.
Following NACE MR)175 is very crucial, since this is an Oil-filed related work.
We would appreciate it If you can help us find a potential supplier.
Thanks for the help,
Our company is looking into an Alaska Project.
We are involved in the development of a High Pressure Pumping System capable of operating in temperatures from - 50 Degrees F to + 140 Degrees F.
We have to come up with the skid for an outside unit. The material selected should be suitable for operation at the North Slope of Alaska, a severe-weather environment, winds to 100 mph, blowing snow, icing conditions etc.
Following NACE MR)175 is very crucial, since this is an Oil-filed related work.
We would appreciate it If you can help us find a potential supplier.
Thanks for the help,
