Jun 23, 2011 #1 reezadaman Mechanical Jun 1, 2011 14 Hi could anyone fill me in on how they do material identification at steel mills?
Jun 23, 2011 #2 metengr Materials Oct 2, 2003 15,478 There are several methods that can be used to verify chemical composition of a heat (laddle analysis) and product analysis. It depends on the mill. Call the steel mill directly, and they will tell you. Upvote 0 Downvote
There are several methods that can be used to verify chemical composition of a heat (laddle analysis) and product analysis. It depends on the mill. Call the steel mill directly, and they will tell you.
Jun 27, 2011 #3 TVP Materials Apr 12, 2002 4,592 Optical Emission Spectrometry is the standard method used. The following link has a lot of information on the method, equipment, etc.: http://www.spectro.com/pages/e/p0102.htm Upvote 0 Downvote
Optical Emission Spectrometry is the standard method used. The following link has a lot of information on the method, equipment, etc.: http://www.spectro.com/pages/e/p0102.htm
