Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations IDS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Mazak 2D Laser Super Turbo X48 **Power Failure**

Status
Not open for further replies.
MazakSuperTurboGuy

MazakSuperTurboGuy

Industrial
Jul 8, 2013
1
We had a power outage while the machine was cutting the sheet. Now we are trying to restart the machine and we are unable to send Z-X-Y axis to a home position. The "Z" cutting head when trying to send home, it moves only downwards and does not complete its full motion by going down then up and back to home position. Any suggestions on how to solve this malfunction would be greatly appreciated.

Thanks,
Paul
 
Status
Not open for further replies.

Similar threads

lampik
  • Locked
  • Question
case bystronic laser btl 2800 measure problem
Replies
0
Views
434
lampik
lampik
Justin Langley
  • Locked
  • Question
Laser Cutting Perforated Sheets - Problem with Warpage 1
Replies
2
Views
1K
ZixmiX
ZixmiX
Imposter666
  • Locked
  • Question
The cheapest methods to make this FPV Drone frame parts that are made from super stiff carbon?
Replies
3
Views
706
Compositepro
Compositepro
Jack_the_JOAT
  • Locked
  • Question
Designing a quadcopter powertrain.
Replies
1
Views
598
btrueblood
btrueblood
noahd
  • Locked
  • Question
Amada Laser cutting problems
Replies
3
Views
411
JaunH
JaunH

Part and Inventory Search

Sponsor

Back
Top Bottom