Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Mazak Spacegear 48 1
- Thread starter Laudy
- Start date
-
1
- #2
laserman16
Industrial
If you contact Mazak Optonics they will be able to assist you with that. If you don't have the manual anymore your best bet is to order one via Mazak directly...the end result will be a lot of time saved and lessen the risk of damaging the machine.
When you call - 1 847 252 4600 - ask to speak to Applications support and they will be able to assist you and give you the direction you are looking for.
I wouldn't recommend you trying it solo.
When you call - 1 847 252 4600 - ask to speak to Applications support and they will be able to assist you and give you the direction you are looking for.
I wouldn't recommend you trying it solo.
laserman16
Industrial
Laudy, just to let you know, the cost of a new manual will run you about $160. I am told it can take 10 weeks to get it sent out to you as all manuals come from Japan and are made to order when it comes to older machines.
Good luck.
Good luck.
- Status
Similar threads
- Locked
- Question
