Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations Toost on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

MC cable slippage

Status
Not open for further replies.
stanatvail

stanatvail

Electrical
Jul 16, 2007
2
How do you prevent a General Cable 500/3 XLP AIA 600V PVC coated MC cable from slipping through it's housing. This is a hefty cable we are routing in a ditch up a ski hill. Tech support "suggests" setting S and ? turns within the ditch at intervals going up the hill. Since our ditch is only 4' wide, that may be enough. Just looking for something more substantial. Any suggestions.

Thank you in advance,

Stan
 
Status
Not open for further replies.

Similar threads

rzgpp
  • Locked
  • Question
MV cable termination 1
Replies
2
Views
3K
NickParker
NickParker
aslamajec123
  • Locked
  • Question
Cable current rating
Replies
8
Views
3K
7anoter4
7anoter4
Imumahdi
  • Locked
  • Question
Cable Glands Earth Tags Location
Replies
5
Views
3K
waross
waross
R
  • Question
Thermal resistivity for UG cable calculations
Replies
8
Views
3K
wcaseyharman
wcaseyharman
rockman7892
  • Locked
  • Question
138kv Cable in Tray
Replies
4
Views
531
7anoter4
7anoter4

Part and Inventory Search

Sponsor

Back
Top Bottom