Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations IDS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

measure analysis

Status
Not open for further replies.

ProEDesigner00

Mechanical
Oct 17, 2003
203
Ladies and Gentlemen

I am working in wf3. I see I can save the measured features and then undo these saved measurements. The "however" part is that some of these saved measurements are remaing on the screen thus cluttering things up. Where are these measurements being saved? How can they be edited? How can a person remove these measuremnts with out closing and reopening the assembly or part?

TIA

Norb
 
Replies continue below

Recommended for you

Norb,

Try Analysis>Hide All
Or Analysis>Saved Analysis>- (Delete selected analysis)
Or Analysis>Delete/Delete All

You can also save the analysis as a feature (you probably need BMX license for this)

Hope this helps

John
 
In Wildfire you can navigate through the saved analyses and through a simple dialog window which will hide or show the selected analysis features when you click the Eye toggle icon.

To get the tool select Saved Analysis on the Analysis pulldown menu the icon has a ruller and disk on it.
To edit the analysis you click the icon with the Pencil & Ruler on it.

You can do a lot with the standard saved analysis for quick checks that don't need to be integrated with product development and dimensions of fatures.

Michael
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor