Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Measuring flow in an IV line

Status
Not open for further replies.

bravedog

Mechanical
May 29, 2008
6
Would anyone know of a good flowmeter that can measure saline flow in an IV line? The saline will be aerated. I also need it to a fast reaction time (<100ms).

Thanks!
 
Replies continue below

Recommended for you

range gated doppler (20 mhz, ultrasonic) has been used in small diameter passages
 
Any ideas on where I could buy one of those?
 
the only one I am familiar with was custom built R&D and produce flow profiles in small capillaries

you might try GE Medical
 
I don't know what the saline flow rate in an IV line is, but here's a snapshot of flow rates for a low flow coriolis meter:

2zs49k2.jpg\


 
Status
Not open for further replies.

Part and Inventory Search

Sponsor