Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations GregLocock on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Mechanical room as return plenum

Status
Not open for further replies.
jamesmichael

jamesmichael

Mechanical
Jun 1, 2005
1
I am working on a condo project in MA. I am using 90+ furnaces sealed combustion, in a mechanical room. I would like to use the mechanical room as a plenum for the return. Is this a code issue.
 
Status
Not open for further replies.

Similar threads

FAHADRANA
  • Question
WQT for Combination of Welders as per ASME Sec IX
Replies
1
Views
2K
weldstan
weldstan
kremenco
  • Locked
  • Question
Should the Jacket of a Cryogenic Vessel be considered as pressure vessel?
Replies
7
Views
192
LittleInch
LittleInch
sshep7
  • Locked
  • Question
SA-53 E/B used as a vessel shell Section - UW-12(e) UW-12(d), UW-11(a)(5)(b) and what JE to use
Replies
4
Views
220
david339933
david339933
Mustufa70
  • Locked
  • Question
Does tracing coil on non-pressure vessel requires to be examined as Per ASME design equiments
Replies
0
Views
64
Mustufa70
Mustufa70
Khalid Hameed
  • Question
ASME B 31.3 and ASME B31.8
Replies
4
Views
976
Khalid Hameed
Khalid Hameed

Part and Inventory Search

Sponsor

Back
Top Bottom