shashankTurbomachine
Mechanical
- Oct 25, 2011
- 52
Can anybody thro light upon "Selection of Seal configurations(Face to Face, face to back, back to back)"
I came to know that as per API 682 first edition default configuration for dual pressurized contacting wet seal was 3CW-FB and for non contacting it was 3NC-BB.
As we know arrangement 3 is available in three configuration for both the contacting wet type & non contacting i.e., 3CW-FF, 3CW-FB, 3CW-BB, 3NC-FF, 3NC-FB and 3NC-BB
regards,
Shashank
I came to know that as per API 682 first edition default configuration for dual pressurized contacting wet seal was 3CW-FB and for non contacting it was 3NC-BB.
As we know arrangement 3 is available in three configuration for both the contacting wet type & non contacting i.e., 3CW-FF, 3CW-FB, 3CW-BB, 3NC-FF, 3NC-FB and 3NC-BB
regards,
Shashank
