Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Mesh Refinement

Status
Not open for further replies.
ispope

ispope

Industrial
Joined
Mar 21, 2014
Messages
8
Location
ES
Hi,
I am working with a model and I need to refine the mesh locally. This is a shell s8r elements mesh, and I do not know what is the best technique to achieve this mesh refinement. I have tried using the MPC QUADRATIC but I do not get good results so I am trying to do the local refinement using trias in the transition zone, but I was told to avoid trias if possible...

Regards.

 
Status
Not open for further replies.

Similar threads

swahlgren
  • Question Question
Splitting part while keeping mesh
Replies
2
Views
14K
swahlgren
swahlgren
IcarusAero223
  • Question Question
Mesh singularity on non-manifold geometry
Replies
5
Views
10K
IcarusAero223
IcarusAero223
E
  • Locked
  • Question Question
Mesh Problem
Replies
1
Views
2K
FEA way
FEA way
AlanSYH_
  • Locked
  • Question Question
Mesh Convergence Test
Replies
6
Views
972
AlanSYH_
AlanSYH_
K
  • Question Question
Trouble Meshing Imported SolidWorks Part in Abaqus – Need Help with Hex or Hex-Dominated Mesh
Replies
2
Views
12K
Simfinite engineering
Simfinite engineering

Part and Inventory Search

Sponsor

Back
Top