Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Meshing problems

Status
Not open for further replies.
yanger11

yanger11

Mechanical
Mar 21, 2006
23
0
0
US
I am importing parts and I want to use poroelastic conditions but the problem is too big to run with quadratic elements. I can not select linear elements though. Is there a setting where I can run the contact problem with linear elements?
 
Status
Not open for further replies.

Similar threads

mj345
  • Question
Hybrid Meshing in ABAQUS
Replies
1
Views
34
FEA way
FEA way
han_cyuan
  • Locked
  • Question
Abaqus solves problems
Replies
1
Views
4
FEA way
FEA way
Taylor W
  • Locked
  • Question
Trouble meshing part
Replies
3
Views
7
FEA way
FEA way
psustudent
  • Locked
  • Question
Meshing around a 10 micron wide crack
Replies
4
Views
8
FEA way
FEA way
Carlygao
  • Locked
  • Question
problems using Abaqus2020+VS2019
Replies
3
Views
9
FEA way
FEA way
Back
Top