Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Microstructures for:

Status
Not open for further replies.

scousertommy

Mechanical
Nov 17, 2005
1
0
0
IE
Hi, is there anywhere on the net where I might find pictures of the microstructures of any/all of the following:

Cu/4%Sn, as-cast
Cu/4%Sn, annealed
Cu/37%Zn, as-cast
Cu/42%Zn, as-cast

Cu/4.5%P
Cu/8.4%P

Al/4%Cu, solution treated
Al/4%Cu, solution treated & over-aged
0.35%C steel, annealed
" , normalised
" , quenched
" , quenched and tempered.


Hopefully I'm not in the wrong forum here. Any help would be much appreciated. Thanks.
 
Replies continue below

Recommended for you

Status
Not open for further replies.
Back
Top