Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
MIL-M-3171 COATING
- Thread starter KHI
- Start date
- Thread starter
- #3
KHI...
REF Ty VI: as with most chem films, there is virtually NO measureable thickness +/- change. There will probably be an increased thickness of +0.0001-inch (+0.0025-mm)... if it could be measured (I doubt if conventional measurement instruments would see any difference).
Regards, Wil Taylor
REF Ty VI: as with most chem films, there is virtually NO measureable thickness +/- change. There will probably be an increased thickness of +0.0001-inch (+0.0025-mm)... if it could be measured (I doubt if conventional measurement instruments would see any difference).
Regards, Wil Taylor
KHI,
Here is the link to the old Mil Spec.
Here is the link to the old Mil Spec.
- Status
Similar threads
- Locked
- Question
- Question
- Question
- Locked
- Question