Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Milling and drilling composites

Status
Not open for further replies.
bluecomp

bluecomp

Materials
Oct 19, 2010
30
0
0
PT
Hi, anyone knows good sites with information or videos on high speed five-axis milling and drilling of composite component and molds.

Thanks
 
Status
Not open for further replies.

Similar threads

kevlar49
  • Locked
  • Question
Finding manufacturers of titanium metal matrix composites
Replies
0
Views
9
kevlar49
kevlar49
Eton
  • Locked
  • Question
What are the difficulties in machining phenolic resin Aramid Honeycomb (milling)? 2
Replies
3
Views
23
Eton
Eton
JD_WTG
  • Locked
  • Question
GFRP Composite Tear Out and Bearing Strength?
Replies
8
Views
13
SWComposites
SWComposites
Revngeofrobo
  • Locked
  • Question
Balancing Warp and Weft Face
Replies
6
Views
32
SWComposites
SWComposites
CHagen
  • Locked
  • Question
Composites in non-redundant safety critical role
Replies
2
Views
3
Sparweb
Sparweb
Back
Top