Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

MIniature Wireless Transceiver with RS-485 interface for Telemetry

Status
Not open for further replies.

dimachorny

New member
Nov 3, 2007
31
Hello,

I need a solution for wireless telemetry data transmitting with following requirements:
1. Input and output terminals are RS-485 half duplex
2. Data rate: ASCII 10 bytes, up to 500 samples per second
3. Transmitting range: up to 50 meters
4. Voltage supply: 7.4 or 3.7 volts (nominal)
5. Size/Volume limitations for transmitter: don't exceed 25x40x10 mm
6. 433 MHz band preferable (anyway must meet european regulation requirements)
7. The data stream is:
Output device RS-485 --> Transmitter --> Antenna --> Wireless com --> Antenna --> Receiver --> RS-485 Input device

Any suggestion is appreciated,
Thank you
 
Replies continue below

Recommended for you


Dan - Owner
URL]
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor