Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations GregLocock on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Minitab books

Status
Not open for further replies.

WGJ

Automotive
Jun 14, 2001
1,812
Can anybody recommend a good guide to using Minitab?

Bill
 
Replies continue below

Recommended for you

Many thanks magoo2 -- I bought another book published/authored by QSB, one of their spiral-bound series and it's a good general guide I must say. It's a bit thin in some areas but, generally good. I was having a brain fade with what I suppose is a simplpe Minitab area (Cause & Effect diagram) and it wasn't much halp, but a delve into some other training material helped out.

I should have found that Minitab.com site shouldn't I? Don't know how I managed to pass that one by, but thanks for the ref, I've just been there and found some very instructional stuff.

Cheers !

Bill
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor