HephaestusGR
Automotive
Is it possible to mirror a Modal Model (e.g for symmetrical parts)
Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
MIRROR MODAL MODAL
- Thread starter HephaestusGR
- Start date
- Status
GregLocock
Automotive
Yes... but I wouldn't.
for an example of the difficulties consider the out of plane modes of a brake rotor.
Cheers
Greg Locock
New here? Try reading these, they might help FAQ731-376
for an example of the difficulties consider the out of plane modes of a brake rotor.
Cheers
Greg Locock
New here? Try reading these, they might help FAQ731-376
- Thread starter
- #3
HephaestusGR
Automotive
I would like to be more specific. I have the left tire of a car and I have the modal model of it. Then I want to mirror it in order to create the right tire. Is this possible? Or I have to use any symmetric constraints when producing the modal model?
Thank you
Thank you
GregLocock
Automotive
That sounds sensible.
Cheers
Greg Locock
New here? Try reading these, they might help FAQ731-376
Cheers
Greg Locock
New here? Try reading these, they might help FAQ731-376
- Status
Similar threads
- Locked
- Question
