OK… I have a part and its mirror (also a part) which consists of the original part as a solid body. Since I created it, I added a configuration to the original which I would like to show up in the mirrored one. I've added a configuration to the mirrored part but cannot find a way to specify which configuration of the original I want… is it possible?
Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Mirrored Parts' Configurations
- Thread starter dsuelflow
- Start date
I am writing this from memory so the exact terminology may be slightly off.
Within the mirror part (in the proper configuration) right click the mirror feature in the feature tree. Select list external references. Within the new dialog, you should be able to select which configuration of the parent file is driving this particular config of the chile part.
-Dustin
Professional Engineer
Pretty good with SolidWorks
Within the mirror part (in the proper configuration) right click the mirror feature in the feature tree. Select list external references. Within the new dialog, you should be able to select which configuration of the parent file is driving this particular config of the chile part.
-Dustin
Professional Engineer
Pretty good with SolidWorks
- Status
Similar threads
- Locked
- Question
- Locked
- Question