Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Mixing Brands of High Pressure Fittings

Status
Not open for further replies.

Here.2.Learn

Materials
Jun 9, 2022
1
Does anyone have experience in adapting an autoclave fitting over into a Butech T-Joint?
Need to configure The variable frequency drive of a waterjet using all butech fittings and lines but the best option for a gauge rental comes with an autoclave fitting. an adapter for the sizing seems to be available from both companies but their anti vibration fitting setups are slightly different. Any tips on connecting the two brands?
Should it even be done? we only need a good seal for about half an hour of use

butech lines and blocks are 3/8" 60 KSI CAT#60L6
autoclave fitting sizing is as per uploaded drawing
 
 https://files.engineering.com/getfile.aspx?folder=b9a1016c-c57b-4c63-b397-eb77538d4b69&file=Drawing_of_ADT100-HPM-M14F.pdf
Status
Not open for further replies.

Part and Inventory Search

Sponsor