Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

MMFX

Status
Not open for further replies.
STR04

STR04

Structural
Jun 16, 2005
187
All,

How many engineers, not involved with the bridge industry, are using MMFX for corrosive environments?

TIA

 
Replies continue below

Recommended for you

Sort by date Sort by votes
I've heard a presentation on it. I've never heard of it being used locally (Minnesota).

Sounds like a good idea, but from my limited information I would be concerned about cost, availability, competitive bidding, etc. and probably would specify it only after having written approval from the building owner and architect.

Having said that I'm sure it has its place and may become a competitive player in the future.
 
Upvote 0 Downvote
I just approved using this type of steel for rebars in a very corrosive environment.

I hear nothing but good things about it.

Regards,
Lutfi
 
Upvote 0 Downvote
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top Bottom