Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Modeling Distribution Lines USing CDEGS software
- Thread starter rezaa
- Start date
Hi Rezza
In the CDEGS "How To Engineering Guide" named Electromagnetic Fields near a Transmission Line Tower Subjected to Unbalanced Currents and a Phase to Ground Fault, SES list a formula
(page 2-2) that the line should be modeled 10 times dmax on either side of every observation point to be modeled. They define dmax as the maximum distance from the furtherest away observation point and the transmission line.
Hope this helps
In the CDEGS "How To Engineering Guide" named Electromagnetic Fields near a Transmission Line Tower Subjected to Unbalanced Currents and a Phase to Ground Fault, SES list a formula
(page 2-2) that the line should be modeled 10 times dmax on either side of every observation point to be modeled. They define dmax as the maximum distance from the furtherest away observation point and the transmission line.
Hope this helps
- Status
Similar threads
- Locked
- Question
- Locked
- Question