Mar 7, 2015 #1 youjinna Mechanical Feb 24, 2015 6 TN Is it possible to model a part like a flexible link with ABAQUS? Particulary a part to model a cable behavior which does not present any efforts of moment resulting according to the perpendicular to its centerline.
Is it possible to model a part like a flexible link with ABAQUS? Particulary a part to model a cable behavior which does not present any efforts of moment resulting according to the perpendicular to its centerline.
Mar 9, 2015 #2 DrBwts Mechanical Nov 4, 2012 297 GB Have a look at the beam elements there is probably a cable element on at least one that transmits no load under compression. Upvote 0 Downvote
Have a look at the beam elements there is probably a cable element on at least one that transmits no load under compression.
Mar 9, 2015 #3 Mustaine3 Mechanical Feb 25, 2015 1,645 FR I think Truss elements would be better. Upvote 0 Downvote
Mar 9, 2015 #4 IceBreakerSours Bioengineer Jan 18, 2012 1,634 US There may be a connector element that will fit your needs. Are you new to this forum? If so, please read these FAQ: http://www.eng-tips.com/faqs.cfm?fid=376http://www.eng-tips.com/faqs.cfm?fid=1083 Upvote 0 Downvote
There may be a connector element that will fit your needs. Are you new to this forum? If so, please read these FAQ: http://www.eng-tips.com/faqs.cfm?fid=376http://www.eng-tips.com/faqs.cfm?fid=1083