Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Modelling a structural object surrounded by Fluid

Status
Not open for further replies.
Jlog50

Jlog50

Mechanical
Sep 16, 2010
118
Hello all,

I am interested in modelling a structural object under contact surrounded by a fluid to look at FSI in abaqus 6.10. Any tips on how I go about doing this. Anybody done this before or can provide any input. This would be much appreciated. Thanks
 
Replies continue below

Recommended for you

Sort by date Sort by votes
I am also interested in modelling contact with a lubricant between the surface to look at FSI... any advice on this, thanks.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

spyros_ar
  • Question
Modelling a sandwitch structure in Abaqus
Replies
6
Views
2K
FEA way
FEA way
A
  • Question
Coupling object movements - Jacking type movement
Replies
3
Views
2K
FEA way
FEA way
abc123ali
  • Locked
  • Question
Cohesive zone modelling experimental input for simulation compatibility
Replies
2
Views
452
abc123ali
abc123ali
Marekcom
  • Locked
  • Question
Structural acoustic coupling using Abaqus
Replies
2
Views
173
Marekcom
Marekcom
abc123ali
  • Locked
  • Question
Cohesive zone modelling trapezoidal output problem
Replies
1
Views
176
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top Bottom