Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Modelling of water

Status
Not open for further replies.
williwang

williwang

Mechanical
Joined
Nov 8, 2008
Messages
72
Location
AU
Good day, everyone!

I've tried to simulate water by using EOS. Us and Up function.

What happend is that after I added gravity into the system, water is compressed by a large amount. I know it is not right. But I couldn't figuer out what was wrong. Could anyone give me a hand?



Forever Young.....
 
Status
Not open for further replies.

Similar threads

spyros_ar
  • Locked
  • Question Question
Modelling a sandwitch structure in Abaqus
Replies
6
Views
3K
FEA way
FEA way
G
  • Locked
  • Question Question
How to create this feature in abaqus part modelling?
Replies
3
Views
1K
FEA way
FEA way
abc123ali
  • Locked
  • Question Question
Cohesive zone modelling experimental input for simulation compatibility
Replies
2
Views
728
abc123ali
abc123ali
spyros_ar
  • Locked
  • Question Question
Solid elements vs Continuum shell elements for modelling a core in a sandwich structure
Replies
10
Views
5K
SWComposites
SWComposites
abc123ali
  • Locked
  • Question Question
Cohesive zone modelling trapezoidal output problem
Replies
1
Views
425
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top