Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Modelling rivets and sheet metal using 2d elements

Status
Not open for further replies.
JK9000

JK9000

New member
Jan 26, 2011
2
0
0
ZA
Hello All

I am looking for suggestions on how to go about modelling riveted joints in sheet-metal structure modelled with 2d elements.

Thanks in advance
Jan
 
Status
Not open for further replies.

Similar threads

barrti
  • Locked
  • Question
Creating 2D weld elements in Autodesk Simulation Mechanical (Algor)
Replies
0
Views
31
barrti
barrti
Bobfromoh
  • Locked
  • Question
Error message for beam elements
Replies
0
Views
19
Bobfromoh
Bobfromoh
IPO25
  • Locked
  • Question
2d elements connected in 3d space (rigid/gap/spring?)
Replies
0
Views
7
IPO25
IPO25
ErikTB
  • Locked
  • Question
2D electrostatic simulation
Replies
0
Views
6
ErikTB
ErikTB
McT178
  • Locked
  • Question
Getting high thermal stress in 2D axisymmetric model
Replies
1
Views
18
McT178
McT178
Back
Top