Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Modifying links in CatDrawing 1

Status
Not open for further replies.

sleske

Mechanical
Joined
Jul 18, 2006
Messages
53
Location
US
Hey all!

I need to know if it is possible to take a view (in a CatDrawing), that is linked to one CatProduct, and modify it so that it is ALSO linked to another Catproduct or just relink it to a different Catproduct.

My issue is that I created a view, using CatProduct A. Now I need to add, in phantom, components from Catproduct B. Is there a way to add Catproduct B to the links of my view?

Thanks for the help!

 
create CATProduct C with 2 components : CATProduct A and B

Link your drawing with CATProduct C.

Using overload properties, turn drawing elements from CATProduct B as phantom line...

Eric N.
indocti discant et ament meminisse periti
 
As long as you are NOT in an ENOVIA environment. If you are using VPM or LCA, you will need to isolate the view after projecting the phantom geometry.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top