Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Modifying regular MMA welding machine into TIG and MIG ?

Status
Not open for further replies.

Uralsk

Mechanical
Feb 21, 2021
39
What kind of modification do i need to convert this regular MMA welding machine into TIG and MIG ?
IMG_20220407_175659_ybfxld.jpg
IMG_20220407_175746_eserhh.jpg
IMG_20220407_175737_ht3wzq.jpg
IMG_20220407_175652_w5t9fq.jpg
 
Replies continue below

Recommended for you

The simplest conversion is to buy a MIG or TIG welder, either new or used or repair one that has been discarded. If there was a cheaper way you would have found it using Google.
 
No modification necessary. Any constant current power supply can be used to run scratch-start TIG.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor