Moment and force ranges

[DSB123]

Hi,
A newbie at Caesar. Can anyone advise if you can obtain an output of the force and moment "ranges" for elements which have been used in the calculation of the thermal stress range

 

[richay]

Sure, look at the "Force Report" for the "Expansion" (EXP) load case. The values you see are the force/moment ranges.

Richard Ay
COADE, Inc.

 

[DSB123]

Richay,
Thanks for the reply. Thats what I thought but when I look at the output all that is there is a load of N/A's and no values.

 

[richay]

Send the job in to techsupport@coade.com and as for someone to look at it.

Richard Ay
COADE, Inc.