Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Mordern Available Electrical Rod Conductor

Status
Not open for further replies.

georgegeorge

Electrical
May 29, 2003
1
AU
Hello

I am trying to source a modern, commercially available, electrical conducting rod of 3mm and 4 mm dia. This rod to replace a 3mm and 4mm dia carbon rod. Must be able to handle: 4 volts DC and 120 watts and 12 volts DC and 150 watts. Resistance to be typically 1.1 to 1.2 ohms over a 200mm length. New material must be equivalent to carbon rod in electrical and mechanical properties.

Any advice provided is appreciated

Regards
David Campbell
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top