Motion of a bicycle on MSC Adams 2

[Miankovelo]

Hello,
I have a bicycle on Adams. I want it to move following a road that I made with rectangles on Adams View (a straight road, an ascending slope and another straight road at the end of the slope). I used contact on my wheels to the road. The problem is that my bicycle falls after it begins going on the slope. Does anyone have any idea what could be wrong please? I designed the bicycle on Adams View using torus for the wheels, plates and cylinders. Thank you in advance!

 

[GregLocock]

How is the bicycle stabilised?

Cheers

Greg Locock


New here? Try reading these, they might help FAQ731-376

http://eng-tips.com/market.cfm?

 

[Miankovelo]

I didn't do anything to stabilize it, I thought that as long as there is contact with the road it would not fall (^-^').

 

[GregLocock]

Go into the car park. Take your pushbike. Set the handlebars straight. Give it a push forwards. It'll travel about 3m and fall over.

Cheers

Greg Locock


New here? Try reading these, they might help FAQ731-376

http://eng-tips.com/market.cfm?

 

[3DDave]

Not my experience with bicycles.

https://youtu.be/r67gz6Kbk4E?t=8

 

[Miankovelo]

Thank you very much to both of you, and thank you very much for the link