Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

motorcycle carburation 1

Status
Not open for further replies.

plumph

Mechanical
Apr 19, 2001
2
0
0
GB
Honda CB750 DOHC 1980; I would like to know if anybody has overcome the problem of fitting better carbs to the above mentioned bike? I keep finding my bike starts only on 2 cyl, can anbody help?
 
Replies continue below

Recommended for you

two cylinders?
are the other two dry, or are they flooded?

my experience was with a '70 Honda 750- keep float needles in it, so that it didn't flood. worked fine.
 
Hello I don't know who this is going to but what i am trying to do is to remove my query from the forum. Thank you to the chap who replied. The problem was that 2 new spark plugs had failed, another case of ignoring the obvious in the face new must be right?
 
Status
Not open for further replies.
Back
Top