Moving from SolidWorks and customize 1

[packmen]

Hi all.
I'm moving from Solidworks and I'm trying to use the same accelerators but I'm having some problems.
1) can't I use Shift+C for circle (or any other Shift+letter)?
2) I create a accelerator to the Line command, but i cant reproduce double click by an accelerator. Can I?

thanks for the help

Emerson Bottero Branco

 

[ferdo]

Hi,

http://www.eng-tips.com/faqs.cfm?fid=1319

And of course you can customize your accelerators keys. Check the on-line help please.

Regards
Fernando

 

[packmen]

Hi,

1)I don't have the help files and can't find an online help. I donwloaded CATIA from e-mule just to pratice. There is a link I can access?

2)I made Alt+D accelerator for Constraint, but if I want to use it more than one time I need to Alt+D again and I want to keep it activated, like an double click does.Is there a way?

 

[packmen]

One more thing, if I accelerate some command like reframe on with just a letter "X" when I try to use it it apears in the imput field in the status bars insted calling the "reframe on" command.

 

[ferdo]

Hi again

I would suggest you to read this

http://www.catiav5forum.de/thread.php?threadid=2820&hilight=classes

There are few good advices there....

Anyway...

http://www.catiav5forum.de/thread.php?threadid=973&hilight=accelerators

http://www.catiav5forum.de/thread.php?threadid=1081&hilight=accelerators

Regards
Fernando

 

[solid7]

You shouldn't be using letters for accelearators if you have the power input turned on. Turn off power input, and it should work fine. Tools -> Options -> General -> P1 interface should help you out.

-----------------------------------------------------------
Catia Design|Catia Design News|Catia V5 blog

 

[packmen]

Tanks . Changing the interface solved half of my problems here..
thanks for the links too, I'll gonna see them.

Regards
Emerson