montyg11
Electrical
- Sep 13, 2011
- 3
Hello All,
I have six channels each with a +/- output. The negative channel is a referenced ground, and the + would be a 5-12V pulse output which would output a pulse of 5-100ms upon random detection.
I basically need to transmit these pulse outputs over a distance of about 2000 feet and assign them to the same respective channels.
I looked at a Null Modem to 8-port serial device server to ethernet/fibre, but I don't believe the device servers are capable of converting back to 8-port fiber.
The Null Modem was considered because I require 1-way passive transmission without handshaking.
Any guidance please?
Thank you in advance.
I have six channels each with a +/- output. The negative channel is a referenced ground, and the + would be a 5-12V pulse output which would output a pulse of 5-100ms upon random detection.
I basically need to transmit these pulse outputs over a distance of about 2000 feet and assign them to the same respective channels.
I looked at a Null Modem to 8-port serial device server to ethernet/fibre, but I don't believe the device servers are capable of converting back to 8-port fiber.
The Null Modem was considered because I require 1-way passive transmission without handshaking.
Any guidance please?
Thank you in advance.