May 20, 2011 #1 colew Mechanical May 19, 2011 3 Can anyone tell me if 'FKM' (Viton) is acceptable in NACE service?
May 20, 2011 #2 TOVmania Industrial Nov 24, 2010 39 NACE specifies steels and alloys only for SSC applications. No EPDM is specified. Upvote 0 Downvote
May 23, 2011 1 #3 SJones Petroleum Apr 22, 2001 3,910 Yes - if it has been qualified to meet the service conditions: http://www.standard.no/en/Sectors/Petroleum/NORSOK-Standard-Categories/M-Material/M-710/ http://www.hse.gov.uk/research/rrhtm/rr320.htm Steve Jones Materials & Corrosion Engineer http://www.linkedin.com/pub/8/83b/b04 Upvote 0 Downvote
Yes - if it has been qualified to meet the service conditions: http://www.standard.no/en/Sectors/Petroleum/NORSOK-Standard-Categories/M-Material/M-710/ http://www.hse.gov.uk/research/rrhtm/rr320.htm Steve Jones Materials & Corrosion Engineer http://www.linkedin.com/pub/8/83b/b04
May 29, 2011 #4 JLSeagull Electrical Feb 19, 2006 2,070 Which NACE standard such as MR0175, SSPC TR2, SSPC SP5, SSPC SP10 ...;TM0296 for elastomeric materials in sour liquid, ...? Upvote 0 Downvote
Which NACE standard such as MR0175, SSPC TR2, SSPC SP5, SSPC SP10 ...;TM0296 for elastomeric materials in sour liquid, ...?
May 31, 2011 Thread starter #5 colew Mechanical May 19, 2011 3 We adhere to MR0175. Upvote 0 Downvote
