Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations IDS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

nano scale modeling

Status
Not open for further replies.
reza9739

reza9739

Mechanical
Jun 23, 2014
2
Hi everyone,

I am working on a new breakthrough which is recently published in SCIENCE journal. :
In our new system we have NiTi shape memory alloy as the matrix and Nb nanowire on it. is it possible to simulate the new system in nano scale using any commercial software like Abaqus and Ansys?

Thank you in advance.
 
Status
Not open for further replies.

Similar threads

M
  • Question
Modeling elasto-plastic behaviour of NiTi
Replies
1
Views
1K
FEA way
FEA way
abc123ali
  • Question
Different results in cohesive zone modeling for the same data input
Replies
8
Views
3K
FEA way
FEA way
simulation_engineer_2022
  • Locked
  • Question
Modeling viscous behavior of material
Replies
1
Views
153
FEA way
FEA way
abc123ali
  • Locked
  • Question
Cohesive zone modeling results and convergence problem
Replies
1
Views
197
FEA way
FEA way
robertt3
  • Locked
  • Question
Plastic modeling only by Abaqus built-in property settings
Replies
8
Views
193
robertt3
robertt3

Part and Inventory Search

Sponsor

Back
Top Bottom