NAS628-74 OR MS21250-08-74

[AIRFRAMER]

I AM LOOKING FOR THESE BOLTS I HAVE TRIED EVERY WHERE, AND I HAVE NOT FOUND ANY, I DID HOW EVER FIND A COMPANY, BUT THEN THEY SAID WE DO NOT HAVE ANY, AND IS THERE ANT OTHER PART NUMBER OUT THERE THAT IS THE SAME MATERIAL AND SHEAR STRENGTH, THIS A/C HAS BEEN DOWN FOR 38 DAYS NOW, AND I JUST CAN'T SEEM TO GET ANY HELP IN FINDING THESE BOLTS. THE ONLY ONES I FIND ARE -76 AND THEY ARE JUST A BIT TOO LONG, WE ARE ONLY ALLOWED TO USE MAX 3 WASHERS, I ALSO INSTALLED SHIMS AT .32 THE MAX ALSO, 2 BOLTS BOTTOMED OUT ON THE SHANK BUT THE OTHER 6 ARE GOOD. THANK YOU

 

[rb1957]

this is on a P3, that's what i remember from your earlier thread ... what about asking other operators if they have spares ?

 

[prost]

Is MS21250-08074 the same fastener? If so, I found it at

http://www.worldbaseaviation.com/item1/page.cfm/6241