Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations IDS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Need 36" wide 120 BHP 15# steam boiler 1

Status
Not open for further replies.

BronYrAur

Mechanical
Nov 2, 2005
798
I am looking for a manufacturer that makes a 120 BHP low pressure steam boiler that will fit through a 36" wide door. Height and length are not an issue, but width is. I actually need a total of around 480 HP and was hoping to install 4 boilers. That number can possibly be increased or reduced as long as the total is the same. Higher efficiency is better. Natural gas for fuel. I found a manufacturer called L.E.S., but I don't know much about them. I would like to have some other options.
 
Replies continue below

Recommended for you

Sounds like you may want a watertube boiler brought in piece meal and assembled on site.
 
If it is for heating only look up sectional cast iron boilers.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor